New: brand new crate engines, ready to fitFitting in Sydney and MelbourneLocal and independentRebuilding engines since 1982Backed by our own workshops
Sydney engine rebuilders since 1982

Engine reconditioning and crate engines in Sydney and Melbourne

Rebuild your own engine at our machine shop, or choose a brand new crate engine with the price shown. Fitted in Sydney or Melbourne, or delivered Australia-wide.

View crate enginesRebuild my engine

  • Local and independentA Western Sydney engine shop, not a chain.
  • Rebuilding engines since 1982Engines are what we do.
  • Backed by our own workshopsOur warranty is backed by our workshops in Sydney and Melbourne.
  • Prices on every engineFreight and fitting quoted for your job.
Machine shop equipment
Two ways to get back on the road

Rebuild your engine or fit a new one

Engine reconditioning work
Reconditioning

Rebuild the engine you have

Bring us your engine, or the whole vehicle. We strip it, clean it and inspect it. If it is serviceable, you get a fixed quote for the rebuild. Our Auburn machine shop does the work: reboring, crankshaft grinding, cylinder heads and crack testing.

Reconditioning services

Isuzu 4HK1-TC engine, side view on lifting hooks with the rocker gear exposed
Crate engines

Fit a brand new engine

Brand new long bare engines for Toyota, Hyundai, Kia, Nissan, Isuzu, Mitsubishi, Mazda, BMW, Mini and Jaguar Land Rover vehicles. Prices are shown on every engine. Freight is a flat $200 Australia-wide, or we fit the engine in Sydney or Melbourne.

23 engines listed.

Browse crate enginesFind my engine

Machine shop services

Everything done under one roof

  • Engine reconditioningEngine reconditioning means rebuilding your own engine instead of replacing it.
    More about this service

    Engine reconditioning means rebuilding your own engine instead of replacing it. We do this work at our machine shop in Auburn, Western Sydney. First we strip, clean and inspect the engine. If it is serviceable, you get a fixed quote. To start, call 02 9737 0105 or send an enquiry.

    Learn more about Engine reconditioning Auburn: rebuild your own engine
  • Engine repairsEngine repair means fixing a single fault, such as a failed head gasket or a timing problem, without rebuilding the whole engine.
    More about this service

    Engine repair means fixing a single fault, such as a failed head gasket or a timing problem, without rebuilding the whole engine. Reco Services handles engine work from our Auburn workshop in Western Sydney. To start, call 02 9737 0105 or send an enquiry with your vehicle details.

    Learn more about Engine repairs Western Sydney: fixing faults without a full rebuild
  • Cylinder headsCylinder head reconditioning means testing a head for cracks and leaks, checking it is flat, then machining and rebuilding it to the maker's specifications.
    More about this service

    Cylinder head reconditioning means testing a head for cracks and leaks, checking it is flat, then machining and rebuilding it to the maker's specifications. We recondition cylinder heads at our machine shop in Auburn, Western Sydney. To start, call 02 9737 0105 or send an enquiry.

    Learn more about Cylinder head reconditioning Sydney: test, machine and rebuild
  • Crankshaft grindingCrankshaft grinding takes a thin, even layer off worn crankshaft journals so they are round and true again.
    More about this service

    Crankshaft grinding takes a thin, even layer off worn crankshaft journals so they are round and true again. New undersize bearings are then fitted to match. We grind crankshafts at our machine shop in Auburn, Western Sydney. To start, call 02 9737 0105 or send an enquiry.

    Learn more about Crankshaft grinding Sydney: worn journals ground back to shape
  • Machine shop servicesAn engine machine shop measures worn engine parts and machines them back to the maker's sizes and finish.
    More about this service

    An engine machine shop measures worn engine parts and machines them back to the maker's sizes and finish. Reco Services runs its machine shop in Auburn, Western Sydney. We do the machining for our own rebuilds, and we want to support local workshops too. To start, call 02 9737 0105 or send an enquiry.

    Learn more about Engine machine shop Sydney: machining at Reco in Auburn
  • Engine reboringAn engine rebore cuts each worn cylinder to a slightly larger, round and straight size.
    More about this service

    An engine rebore cuts each worn cylinder to a slightly larger, round and straight size. The cylinder is then honed to its final size and finish, and fitted with matching oversize pistons and rings. We rebore engines at our machine shop in Auburn, Western Sydney. To start, call 02 9737 0105.

    Learn more about Engine rebore Sydney: boring and honing worn cylinders
  • Performance enginesA performance engine build is an engine machined and assembled to closer limits than a standard rebuild, for racing or extra power.
    More about this service

    A performance engine build is an engine machined and assembled to closer limits than a standard rebuild, for racing or extra power. Performance racing engines are one of the services at our machine shop in Auburn, Western Sydney. To talk about your build, call 02 9737 0105 or send an enquiry.

    Learn more about Performance engine builds Sydney: race and performance engines
  • Crack testingCrack testing finds cracks in engine parts that you cannot see with the eye.
    More about this service

    Crack testing finds cracks in engine parts that you cannot see with the eye. It uses methods such as magnetic particle testing, dye penetrant and pressure testing. Crack detection is one of the services at our machine shop in Auburn, Western Sydney. To book a test, call 02 9737 0105.

    Learn more about Engine crack testing Sydney: find cracks before you rebuild
Google reviews · Auburn workshop

Customer reviews

Reconditioning Services on Google.

Google reviewsRead all 24 reviews →
Roberto Cavallo
Google review
5 out of 5 stars
Great job, great team great service
Lachlan Grieco
Google review
5 out of 5 stars
Amazing service and work by Hank and his team. Definitely recommend. Very knowledgeable and helpful
luis ortiz
Google review
5 out of 5 stars

Five-star rating. No written comments.

Get a quote

Tell us about your vehicle

We check the fit and reply with a quote.

Fields marked (required) must be filled in. Everything else is optional.

What do you need? (required)

Security check (required)

View our privacy policy

More about Reco, buying an engine and our services

Two ways to get your vehicle running again

Reconditioning: rebuild your own engine

Bring us your engine, or the whole vehicle. We strip it, clean it and inspect it. If it is serviceable, you get a fixed quote for the rebuild. Our Auburn machine shop does the work: reboring, crankshaft grinding, cylinder heads and crack testing.

See reconditioning services

Crate engines: brand new, ready to fit (New)

Brand new long bare engines for Toyota, Hyundai, Kia, Nissan, Isuzu, Mitsubishi, Mazda, BMW, Mini and Jaguar Land Rover vehicles. Prices are shown on every engine. Freight is a flat $200 Australia-wide, or we fit the engine in Sydney or Melbourne.

View crate engines

Crate engines in stock now

A few of the engines we list. Every engine page shows the price, the vehicles it suits, what is included and what moves across from your old engine.

See all crate engines or find the engine for your vehicle.

How buying an engine works

  1. Tell us your vehicle. Make, model, year and series, plus the rego or VIN.
  2. We check the fit. We confirm the engine matches the engine in your vehicle now.
  3. Choose fitting or delivery. Tow in, drive out at our Sydney or Melbourne workshop, or the engine sent to you for a flat $200 freight.
  4. Get your quote. Valid for 30 days. Pay by bank transfer or card over the phone.
  5. Drive away. Run the engine in, register your warranty, and bring it in for its check-up.

Read how it works

Machine shop services

Everything we do at our Auburn machine shop:

Why buy from Reco?

  • Local and independent. A Western Sydney engine shop, not a call centre.
  • Specialised. Engines are what we do, and we have been rebuilding them since 1982.
  • Backed by our own workshops. Our warranty is backed by our workshops in Sydney and Melbourne.
  • Prices on the page. Every engine shows its price. Freight and fitting are quoted for your job.
  • We check before you pay. Your vehicle details first, then the quote.

The workshop

Our workshop and machine shop is at Unit 1/28-30 Hampstead Rd, Auburn NSW 2144.

Visit the Sydney workshop page

Engine advice

Plain answers before you spend money on an engine:

Ask about an engine

Tell us your vehicle and what you need. We check the fit and come back to you with a price.