New: brand new crate engines, ready to fitFitting in Sydney and MelbourneLocal and independentRebuilding engines since 1982Backed by our own workshops
Engines by vehicle

Isuzu D-Max engine replacement

Engines we list for the Isuzu D-Max work ute, by series and year. Send your rego or VIN with your enquiry and we confirm the fit before you pay.

Fitting is not included in the price and is quoted separately. Fitting is available at our Sydney and Melbourne workshops.

Most D-Max utes up to 2020 run Isuzu's 3.0 litre 4JJ1 turbo diesel. We list a new 4JJ1-TC long motor at $7,350, fitted at our Sydney or Melbourne workshop or freighted for a flat $200. From 2021 the D-Max moved to the updated 4JJ3, so we check your VIN before you pay.

Engines by series and year

Isuzu D-Max: All series

Isuzu D-Max engine questions

Which engine is in my Isuzu D-Max?

The 2008 to 2012 D-Max and the 2012 to 2020 RC D-Max both use a 3.0 litre four-cylinder turbo diesel from the 4JJ1 family; the RC Series II from February 2017 met Euro 5. From 2021 the D-Max uses the updated 4JJ3. Your VIN and engine number tell us exactly which one you have.

Will your 4JJ1-TC long motor fit my D-Max?

Our engine is the early Euro 3 and Euro 4 truck-spec 4JJ1-TC. Hank lists it for the D-Max, but emissions version, sensors and ancillaries differ by year. Send us your rego or VIN and we confirm the fit, and what moves across from your old engine, before you pay anything.

My D-Max tows a caravan or a trailer. What should I check first?

Towing near the limit works the engine hard. Before you replace it, check that the EGR valve and intake are not clogged with carbon, that the particulate filter is regenerating, and that valve clearances have been checked. Those are repairs. Internal damage, such as a spun bearing or a damaged piston, means a rebuild or a new engine.

How much does a D-Max engine replacement cost?

Our new 4JJ1-TC long motor is listed at $7,350. The full job adds fitting labour, fluids and filters, and any worn outside parts such as the turbo or injectors. Freight is a flat $200 anywhere in Australia. We quote the total before you pay, and quotes are valid for 30 days.

Sort
Listed order
Engine code
Build type
Fuel
Condition
Availability

Engines

Showing 1 of 1 engines

Sort
Listed order
  • Isuzu 4JJ1-TC engine, side view on lifting hooks
    New

    Isuzu 4JJ1-TC long bare engine

    Fits Isuzu D-Max, MU-X

    Engine code
    4JJ1-TC
    Build
    Long bare
    Warranty
    6 months (trucks and commercial vehicles)

    Was AUD 8,500, now AUD 7,350

Two ways we help

Need your own engine rebuilt instead?

Our Auburn machine shop reconditions engines too. If there is no new engine listed for your code, or your engine is worth saving, see engine reconditioning.

Engine reconditioning
More about these engines

What goes wrong with D-Max engines

The problems reported most often on the D-Max 3.0 are maintenance and emissions related, not design faults.

  • EGR carbon. Soot builds up in the EGR valve and intake, most on utes that do short city runs. Signs are a check-engine light, hard starting, loss of power, higher fuel use and a rough idle.
  • Particulate filter that won't regenerate. A warning light comes on after a run of short trips. A steady highway drive usually clears it.
  • Valve clearances. The engine has no hydraulic lash adjusters, so clearances need checking about every 40,000 km. A tick from the top of the engine, worst from cold, is the warning.

These are repairs. A spun bearing, a damaged piston or a head gasket that failed after overheating is when a rebuild or a new long motor makes sense. Our 4JJ1-TC engine problems article goes into more detail.

Work utes and fleets

If the D-Max earns its keep, downtime costs more than the engine. Tell us when you need it back on the road. We fit at our Sydney and Melbourne workshops, or we freight the engine to your mechanic for a flat $200. See the 4JJ1-TC engine page for the full specification and what comes in the crate.

Engine machining equipment